MXT Capillary Column Coiling Configurations
Restek MXT capillary columns come in the standard configurations given on each product web page. However, they can also be ordered in a variety of other configurations. To order an MXT column in one of the following customized configurations, use the appropriate suffix from the table below. For example, use catalog number 71811-274 to order an MXT-1 column wound to 2.0" ID without cage. Please contact us directly to place your custom order (these configurations cannot be ordered online). Note that additional charges may apply for some configurations.
Please note that MXT PLOT columns are only available in the standard 7"-diameter, 11-pin cage configuration and the “-273” configuration.
All OD's provided are estimates and can vary based on the tubing ID and column length.
|
Catalog Number Suffix |
MXT Coiling Description |
|---|---|
|
-274 |
2.0" ID without cage |
|
-2740 |
2.0" ID banded with copper wire |
|
-273 |
2.75" ID/3.5" OD without cage (fits SRI GCs) |
|
-2730 |
2.75" ID/3.5" OD banded with copper wire (fits SRI GCs) |
|
-2731 |
2.75" ID/3.5" OD without cage, 18" leads (fits SRI GCs) |
|
-2732 |
2.75” ID/3.5” OD without cage, 9” leads (fits SRI GCs) |
|
-283 |
3.5" ID/4.0" OD without cage |
|
-2830 |
3.5" ID/4.0" OD banded with copper wire |
|
-2831 |
3.5” ID/4.0” OD without cage, 18” leads (fits SRI GCs) |
|
-272 |
4.5" ID/5.0" OD without cage |
|
-2720 |
4.5" ID/5.0" OD banded with copper wire |
|
-6850M |
5.0" ID/5.25" OD banded with copper wire |
|
-271 |
6.0" ID/6.5" OD without cage |
|
-2710 |
6.0" ID/6.5" OD banded with copper wire |
|
-276 |
6.0" ID/6.25" OD without cage |
|
-2760 |
6.0" ID/6.25" OD banded with copper wire |
|
-277 |
7.0" ID/7.25" OD without cage |
|
-2770 |
7.0" ID/7.25" OD banded with copper wire |
|
-LUC18 |
0.18 mm ID MXT Column in Lucidity Column Cartridge (fits Lucidity miniGCs)* |
|
-LUC25 |
0.25 mm ID MXT Column in Lucidity Column Cartridge (fits Lucidity miniGCs)* |
|
-LUC28 |
0.28 mm ID MXT Column in Lucidity Column Cartridge (fits Lucidity miniGCs)* |
|
-LUC53 |
0.53 mm ID MXT Column in Lucidity Column Cartridge (fits Lucidity miniGCs)* |
All MXT leads are 36" unless otherwise noted.
*MXT columns for Lucidity miniGCs must be ≤30 m long. Each column comes factory connected in a column cartridge (additional cost will be applied).
*Lucidity Column Cartridges not available for MXT-PLOT columns.