Restek
ホーム / ガスクロマトグラフィー / フェラル、フィッティング&コネクタ / フェラル / Ferrules, Alumaseal, 0.8 mm ID, 10-pk.
Restek
Ferrules, Alumaseal, 0.8 mm ID, 10-pk.
Ferrules, Alumaseal, 0.8 mm ID, 10-pk.
  1. Ferrules, Alumaseal, 0.8 mm ID, 10-pk.
  2. Ferrules, Alumaseal, 0.8 mm ID, 10-pk.

Ferrules, Alumaseal, 0.8 mm ID, 10-pk.

カタログ番号 21474
Ferrules, Alumaseal, 0.8 mm ID, 10-pk.

Ferrules, Alumaseal, 0.8 mm ID, 10-pk.

概要

特徴＆利点
  • Aluminum construction—will not crack or fragment.
  • No retightening required after temperature cycles—excellent for GC-MS.
  • Eliminate out-gassing and make leak-tight seals for less detector noise.
  • Unique two-piece design permanently locks on fused silica tubing without causing breakage.
  • Will not stick in fittings, unlike Vespel or graphite ferrules.
  • Stable to 550 °C.
  • Use with any 1/16" compression-type fitting.
製品詳細

Alumaseal ferrules combine the advantages of graphite and Vespel/graphite ferrules, and eliminate the disadvantages, for enhanced performance in any application. The unique front and back ferrule design seals easily and surely, the ferrules will not fragment or off-gas, and they are stable to 550 °C. Alumaseal ferrules will not allow oxygen to permeate into the system, and do not require retightening after temperature cycles, making them ideal for GC-MS applications. They can be used with any standard 1/16" compression-type fitting with fused silica columns.

For leak-tight seals, we highly recommend you try Alumaseal ferrules.

仕様

製品仕様
カタログ番号
21474
製品名
Ferrules, Alumaseal, 0.8 mm ID, 10-pk.