MXT-Msieve 5A Metal PLOT Column, 30 m, 0.53 mm ID, 50 µm, 3.5" Config
MXT-Msieve 5A Metal PLOT Column, 30 m, 0.53 mm ID, 50 µm, 3.5" Config
概要
金属キャピラリーMXT PLOTカラムの利点:
- コイル直径の小さなカラムを作ることが可能ー小さなスペースにも設置できます。
- 頑健な素材は、手荒な取扱いや衝撃に耐えます。
- プロセスGCやポータブルGCにおいても頑健なパフォーマンスを実現するように設計されています。
- コイルサイズには、直径3.5インチもしくは直径7インチの11ピンケージがあります。*
Restek’s molecular sieve 5A PLOT columns are designed for efficient separation of argon/oxygen and other permanent gases, including carbon monoxide. Special coating and deactivation procedures ensure chromatographic efficiency and the integrity of the porous layer coating. Molecular sieves have very high retention, allowing separations of permanent gases at temperatures above ambient. Our deactivation technology also allows carbon monoxide to elute as a sharp peak. Additionally, our unique immobilization process guarantees that the uniform particles remain adhered to the tubing—even after continuous valve cycling.
Because molecular sieve materials are very hydrophilic, they will adsorb water from the sample or carrier gas. Water contamination can have a detrimental effect on peak symmetry and can reduce the resolution of all compounds. If water contamination occurs, reactivate your Restek Msieve 5A PLOT column by conditioning at 300 °C with dry carrier gas flow for 3 hours.
*PLOTカラムの巻き直しはお勧めしません。巻き直すとチューブの内壁面から粒子が外れる可能性があります。